NEEWER Smartphone Tripod Mount Aluminum Alloy, 360° Rotatable Phone Stand Holder Clamp with Cold Shoe and Arca Base Compatible with iPhone 15 Pro Max Galaxy S24 Ultra Pixel & 2.6″-4″ Wide Smartphones

Really good product! Was surprised
This phone holder quality surprised me. It was much welcomed. It’s really well designed, feels solid. It’s a high quality part, very easy to use – has weight to it, the unit when you turn, has precession, you can feel each turn click into place – the turrets that tighten the swivel is soft but holds in place firmly. Everything is good to the touch and feel. It fits well with my phone when attached to a CamCaddie – I don’t feel like it will slip off once tighten down. Feel confident with the material and design. You can use this in many different applications. The 2 hot shoes is amazing add on. This is a keeper.

Very high quality mount
My DSLR gets used a few times a year to take family pictures around the holidays. However, everyone also wants iPhone pictures they can immediately post and share. This phone mount works great with the DSLR tripod I already have out, and when paired with a cheap bluetooth remote for the phone (or an iWatch) I can quickly switch between camera and phone.I’m sure there are likely cheaper mounts out there, but this one- is all metal,- has good adjustability- has large thumbscrews- fits standard quick-release tripod mounts (or 1/4 and 5/8 screw mounts if you don’t have quick release)- includes a simple “kickstand” on the back to hold the phone on a desktop.I had no issues getting a secure grip on my iPhone 15 in a regular bumper case. You may have to offset it slightly to avoid pressing buttons, but this isn’t a problem.The kickstand is a bit narrow. Flipped forward the phone can sit upright, flipped back it can be angled up. If you’re buying it primarily to use the desktop feature, there are better options but it is a nice +1 feature.All in all, I would definitely purchase again.

Versatile and well made, but clamp jaws shallow
NEEWER Smartphone Tripod Mount Aluminum Alloy, 360° Rotatable Phone Holder with Cold Shoe Mount and Arca Type Base Compatible with … 2.6”–4” Wide SmartphonesASIN B0BLBZHMXWSold by XingBoom, shipped by AmazonI really like most aspects of this smartphone mount, so I don’t want to write a negative review. However, there is an important aspect that I hope will be improved.The effective jaw depth is only 0.5 inch (~1.27 cm), from the top of the rubbery clamp pad down to the rubber pad on the base of the clamp. The thickness of the Otterbox case for my Pixel 5a 5G also is 0.5 inch, at the only practical area on the case that avoids the phone’s side buttons and lenses. The top of the case is slightly beveled, reducing its effective thickness; therefore, the mount can be used.Unfortunately, there is not enough safety margin. If the phone is clamped with a reasonable amount of force, so the phone won’t be crushed, it is not difficult to twist the phone out of the clamp. If the phone is bumped a few times, it could fall out of the clamp. Without the Otterbox case, my phone sits farther down in the clamp, where my phone is held securely and without much freedom to wiggle — but of course, I want my phone to remain in its case.I think the height of the jaws and jaw pads should be increased by at least 0.1 inch (0.25 cm). Maybe the clamp width could be increased from 1 inch to 1.25 inches (2.5 to 3.2 cm). The jaw pads should have higher friction, and the pad width should cover the entire jaw width, to prevent the phone from working out of the clamp jaws. The corners of the jaw pads should be more rectangular than round, to maximize the contact area and resistance to bumping. The rubber pad on the base should extend farther along the base. Maybe the design goal was to advertise a maximum phone width of 4.0 inches, but I think that is much less important than extra security. (I am thinking about how to add an aluminum lip above each jaw; I just need a precision drill press and a tap …)One side of the pivot (knuckle) that holds the folding foot extension is slightly too close to the bottom of the foot. This isn’t a problem when using the folding foot for increased stability without a tripod. I don’t know if there could be a minor problem when using an Arca-type clamp. There is no perceptible play (slop) in the pivot, which is good.Except as mentioned above, the Neewer mount is excellent, well made, sturdy, versatile, and attractive. There is a 1/4″ threaded hole in the head of the clamp screw, and a cold shoe and 1/4″ threaded hole in the Arca-type end of the clamp.(The Ulanzi ST-14 appears to have the same effective jaw height as the Neewer, but slightly wider rubber jaw pads. The Ulanzi has no 1/4″ threaded hole in the clamp screw, and I see no indication that the Arca-type end of the clamp includes any 1/4″ threaded hole.)

Smooth and stable phone mount
I use this mount during video calls and it has never let me down. My previous phone mount wood result in dropped phones at least once per call. The neewer mount grips the phone securely and allows complete adjustment into the angle of the camera.

I wanted a rig that would attach to my telescope, this is perfect solution. Sturdy, well made and performed well with my iPhone 14 Pro Max mounted on my 10 inch Dobsonian.

Me sorprendió la calidad del material y funcionalidad, es muy resistente, fácil de ajustar y muy estable. Se ajusta a cualquier tripié y celular 📱 Da mucha confianza usarlo. Vale cada peso invertido 💰

Vraiment top!! C’est le 3ème que j’achète, ce produit est une très bonne marque.