【 2-Pack 】 Magnetic Phone Holder for Car Dashboard【Strong Magnet】iPhone Magnetic Phone Mount for Car Phone Holder 【4 Metal Plate】Cell Phone Holders for Your Car Mount for iPhone 16 Pro Max 15 14 13 12

Great Product that Gets the Job Done.
the construction of the product feels great. The adhesion pads have a strong hold and I feel confident that it will not come off in normal conditions. The small size of the product makes it discrete and allows for it to not stand out or look to unnatural. Even though it is discrete, it is aesthetically pleasing. The range of motion is average compared to similar products. It holds the position it is set at very well. As for the hold, the magnets do a great job. I’ve been on bumpy roads, hit unsuspecting potholes, had to make some sudden stops, and on gravel roads and it held my phone with no problems. Quick disclaimer, the case I have been using has a metal portion on the outside of the case for magnetic phone holders. That being said, as long as your phone case is not outrageously thick, the included metal sheets also made a strong connection to the magnets. It came with the 2 magnetic holders, multiple metal sheets, a couple of cleaning kits to clean the area where you will be placing the product to ensure adhesion, and some extra adhesion pads for the magnetic phone holder. Overall it is a great product and a great value for all that you receive. I would recommend getting this product if it is something you are looking for.

Great for hands free cell phone use or holding a GPS or ipod
Not my first purchase… bought another vehicle and had have given some as gifts. The first ones I bought I put in my vehicles to hold my cell phone and GPS (before my vehicles HAD GPS installed). The magnet is very strong and yet small. I LOVE that iy pivots because where I put mine, the flat area where the mount is stuck to is a bit slanted. Because the mount pivots I can adjust it and my phone is just right. When I finally traded in my old 2007 vehicle I’d had for years and got a new vehicle. I offered to leave the mount for the next owner because they asked “what’s this?” and I told them how handy it was! My brother in law was amazed when he saw me stick my phone on the mount and asked “Hey, how’d you do that?” I said it’s a magnet and the back of my phone case has a little metal disk that makes it stick.. like this… I’ve given these as gifts and I’ve bought a couple of different types over the years but I like this brand best. So easy to install and use, durable and price is very reasonable. I’m sure there are lots of other uses people could find if they just thought about it a moment! Well worth the purchase and I’m very satisfied with mine, would buy again if/when I need another. It’s not like they wear out. I don’t know how I ever managed without it and I hated the cell phone holders that clip on to the air vents because they block the flow of air. These, no issues what so ever!

Smaller than expected, strong even with plate inside case
I just installed this and tried it out after letting it cure for the recommended 24 hours. It seems very solidly stuck in place. They seem heavy duty, not at all cheap-feeling.It is smaller than I expected (look at the dimensions). Far smaller than a Magsafe size holder. It swivels with a large amount of force. Bumps in the car aren’t going to change the angle, and neither will pulling the phone off or putting it on. I cannot adjust the angle with the phone in place (it will just release from the magnet.)I’m using this with a Galaxy S22 inside a two-part Crave case with textured surface. I put the metal plate in between the two layers of the case. I didn’t use the adhesive and the plate is staying put. This means the phone isn’t quite as solidly attracted to the magnetic holder as it would be if the plate were adhered to the outside of my case.At least with the plate as described in my case, the phone needs to be vertical on the stand. If horizontal, the plate needs to be at the center of gravity or the phone will just rotate to move the heavy end down. The surface of the stand is small, so there is not much friction to help the magnets keeping the phone from rotating, even though the surface of the holder is rubber. I think if the metal plate were on the outside of the case the magnetic force would be stronger, BUT the friction to prevent swiveling would then be lower because of the slick surface of the metal plate. The Crave case isn’t slick, but it isn’t rubbery surface, either.This is well worth the 50% discounted price, especially given there are two in the package, and deserves a full 5 star rating, at least in my initial impressions. If I am unhappy later on, I’ll revise it, but I think it’s going to work out just fine.Included:Two ball-in-socket magnetic stands with adhesiveTwo more disks of adhesiveFour rectangular metal plates with adhesivesome clear plastic pieces the size of the plates (not really sure what for)a little cloth, a few alcohol pads, various instructions

Good phone Holder
Very strong magnets, although the sickness is pretty good but can’t stick to all places.